SM GLASS

This cabin consists of two sides, each of which has a fixed glass part and a movable one. It is most often taken into account in smaller bathrooms, because the door does not burden the rest of the bathroom when opening. The opening is only from the outside and the minimum recommended width of the movable part is 35 cm, because in that case the width of the entrance is about 50 cm. Since this is a custom-made cabin, the widths of the movable and fixed parts, as well as the height, depend only on your desire and the availability of space.

This is the simplest form of custom screen. The Walk In screen rests against one wall and is reinforced with a slanted or straight bar for additional stability. There are no limiting factors, only more stabilizers are added if the dimensions are larger. You just have to take care that there is nothing close to the open area that does not tolerate water.

Folding shower doors, as the name suggests, fold to one side, almost all the way to the wall. They are useful when there is a very small space or there is a need for a wide entry opening. Since they have hinges at each joint, they can be opened like a classic door, without bending the middle part, and can also be opened in half, if there is a need for it. The limiting factor is the width, so this shower door cannot be wider than 80 cm, due to the weight of the glass, and as for the height, it is up to you.

Anyone who has time and likes to spend time in the bathtub, and wants to take a shower without flooding the rest of the bathroom should install a bathtub screen. There are various variations of screens for bathtubs. They can be fixed where one part of the bathtub is closed and such a screen is not movable. There are also those with a movable part, but only for this model there are variations. It can be opened directly from the wall to the outside and inside. If it has one fixed part, then the one that is movable opens only to the outside. You may or may not put a handle, but almost everyone opts for a towel holder that is mounted on the screen, so the towel is very close when you need it. The sliding screen for the bathtub is a screen that is located on the bathtub, extends between two walls and opens by sliding. You should pay attention to the width of the entrance, because with the total width of the screen of 100 cm, the entrance is about 48 cm, so anything below that would be more difficult to enter the bathtub.

This is absolutely the most requested model of custom cabins. With a sliding shower cabin, one side is fixed, while the other side opens by sliding. You should pay attention to the width of the entrance, because with a total door width of 100 cm, the entrance is about 48 cm, so anything below that would make it more difficult to enter the cabin. Whoever has space in the bathroom should have a shower corner like this. It looks elegant and spacious, and yet does not disturb the space with its robustness and the massiveness of its fittings.

Sliding shower doors are doors that extend from wall to wall and slide open. You should pay attention to the width of the entrance, because with a total door width of 100 cm, the entrance is about 48 cm, so anything below that would make it difficult to enter the shower area. Since the opening of these doors does not affect the space and the environment, they are among the most popular in our product range.

The pentagonal shower cabin has 3 glass parts that rest on each other and connect at an angle of 135 degrees. Since custom cabins are made only in a straight line, this model should be able to compete with mass-produced arched cabins. The pentagonal cabin is a compromise between the shower area and the rest of the bathroom, because it takes up less space than any "angular" one, and still provides a comfortable shower. The door cannot be wider than 75 cm, and the fixed parts and height are as desired. The door opens only from the outside.

In the case of a pivot cabin with a door frame, one side is fixed while the other has a smaller fixed part and a larger entrance part, i.e. the door. This type of custom-made cabin must be used where the width of the side from which it is entered exceeds 75 cm. The doors open outwards, so these cabins require free space for opening, depending on the width of the door. The fixed side is attached by a slanted or straight bar, and at the entrance there is a threshold in the form of an aluminum molding that does not allow water to get outside the shower cabin.

A shower door is an element that is generally up to 75 cm wide and is mounted by mounting the hinges on the wall. This type of custom-made door can be used where the width does not exceed 75 cm. If the door is between 75cm and 1m wide, a third hinge is placed, which is positioned in the upper half of the door. The door opens outwards and inwards, so this type of door gives you a choice when entering. There is an option to have a threshold at the entrance in the form of an aluminum molding that does not allow water to get outside the shower cabin, but in that case you choose the direction of the door opening.

If your shower area is surrounded by 3 walls, and the width between the 2 walls where the shower should be located is over 75 cm, then you need a shower door with a door frame. The reason for this limitation is, of course, the weight of the glass, and everything over 75 cm, must have an additional glass part on which the hinges are located. Another condition is that the door frame must not be wider than 75 cm. If by any chance you need it wider, the door remains a maximum of 75 cm, and the door frame goes into the width. The opening is done either inside or outside. The height is not limited.